Articles
| Open Access |
https://doi.org/10.55640/ijce-06-02-01
Heat and Mass Transfer of Bulk Materials in A Fluidized Bed Using A Lateral Flat Jet
Sheraliyeva Ozoda , Associate Professor, Department of Technological Process and Equipment Design, Tashkent Institute of Chemical Technology, Uzbekistan Nigmadjonov Samugjon Karimjonovich , Associate Professor, Department of Technological Processes and Equipment Design, Tashkent Institute of Chemical Technology, UzbekistanAbstract
This article examines the mechanisms for intensifying heat and mass transfer processes in fluidized bed apparatuses. Primary focus is placed on the implementation of a lateral flat jet as a method for controlling bed hydrodynamics. The study analyzes the impact of additional jet influence on flow structure, the elimination of stagnant zones, and the enhancement of the heat transfer coefficient,
Keywords
Fluidized bed, vibro-fluidized bed, heat and mass transfer
References
Pavlov, N. V., Shaptala, V. G. Investigation of heat transfer in a fluidized bed under jet action. Izvestiya vuzov. Chemistry and chemical technology. 2012. Vol. 55.
Baskakov, A.P. Heat and mass transfer in a fluidized bed. Moscow: Metallurgiya, 1978. 248 p.
Gelperin, N.I., Einstein, V.G., Kvasha, V.B. Fundamentals of fluidization technology. Moscow: Khimiya, 1967. 664 p.
Sazhin, B.S. Fundamentals of drying techniques. Moscow: Khimiya, 1984. 320 p.
Muratov A., Gulyamov S. M. Automation of fluidized bed drying processes. Tashkent: TASHSTU, 2015.
Article Statistics
Downloads
Copyright License
Copyright (c) 2026 Sheraliyeva Ozoda, Nigmadjonov Samugjon Karimjonovich
This work is licensed under a Creative Commons Attribution 4.0 International License.