Articles
| Open Access | PURIFYING WATERS: BISPHENOL-A REMOVAL FROM AQUEOUS SOLUTIONS USING POLYMERIC RESIN IMPREGNATED WITH PHOSPHOROUS-BASED EXTRACTANT
Shivani Batra , Department of Chemical Engineering Malaviya National Institute of Technology (MNIT), Jaipur, Rajasthan, IndiaAbstract
This study explores an innovative approach for the removal of Bisphenol-A (BPA) from aqueous solutions using a polymeric resin impregnated with a phosphorous-based extractant. Bisphenol-A, a widely used industrial chemical, is known for its endocrine-disrupting properties and environmental persistence. The impregnated polymeric resin offers a promising solution for efficient BPA removal due to the selective binding affinity of the phosphorous-based extractant. The experimental investigations include batch sorption studies, isotherm analysis, and kinetic evaluations to elucidate the efficiency and mechanisms of BPA removal. The findings showcase the potential of the developed polymeric resin as a sustainable and effective tool for purifying water contaminated with Bisphenol-A.
Keywords
Bisphenol-A, Polymeric Resin, Phosphorous-Based Extractant
References
H. Ashraf and Q. Husain, “Use of DEAE cellulose adsorbed and crosslinked white radish (Raphanus sativus) peroxidase for the removal of α-naphthol in batch and continuous proces,” Int. Biodeterior. Biodegrad, vol. 64, pp. 27-31, October 2010.
C. Karunakaran, S. Narayanan, and P. Gomathisankar, “Photocatayltic degradation of 1-naphthol by oxide ceramics with added bacterial disinfection,” J. Hazard. Mater, vol. 181, pp. 708-715, June 2010.
K. Ballschmiter and H. M Kuch, “Determination of compounds and estrogens in surface and drinking water by HRGC- ( NCI ) -MS in the picogram per liter range, science,” Environ. Sci. Technol., vol. 35, pp. 3201-3206, 2001.
N. A. Ahmad, M. A. Yuzir, E. L. Yong, N. Abdullah, and M. R. Salim, “Removal of bisphenol a (BPA) in surface water by ozone oxidation process,” Appl. Mech. Mater, vol. 735, pp. 210-214, Feb. 2015.
C. N. Huy, N. Kim, T. D. phan, I. K. Yoo, and E. W. Shin, “Adsorptive interaction of bisphenol a with mesoporous titan silicate / reduced graphene oxide nanocomposite materials: FT-IR and Raman analyses,” Nanoscale Research Letters 2014,, vol. 9, pp. 1-7, 2014.
T. Safabakhsh and H. Pourzamani, “Removal of bisphenol a from aqueous solutions using magnetic nanoparticles: Investigation of adsorption isotherms,” Int. J. Environ. Health Eng, vol. 5, pp. 25, July 2016.
V. Repousi, A. Petala, Z. Frontistis, M. Antonopoulou, I. Konstantinou, D. I. Kondarides, and D. Mantzavinos, “Photocatalytic degradation of bisphenol A over Rh/TiO2 suspensions in different water matrices,” Catal. Today, vol. 284, pp. 59-66, Oct 2016.
J. Chen, X. Huang, and D. Lee, “Bisphenol A removal by a membrane bioreactor,” Process Biochem, vol. 43, pp. 451-456, Jan 2008.
Rajan, S. Sreedharan, and V. Babu, “Solvent extraction and adsorption technique for the treatment of pesticide effluent,” Civ. Eng. Urban Plan. An Int. J, vol. 3, pp. 155-165, June 2016.
J. Bokhove, B. Schuur, and A. B. De Haan, “Solvent design for trace removal of pyridines from aqueous streams using solvent impregnated resins,” Sep. Purif. Technol, vol. 98, pp. 410-418, July 2012.
Article Statistics
Downloads
Copyright License
Copyright (c) 2024 Shivani Batra

This work is licensed under a Creative Commons Attribution 4.0 International License.