Prof. Dr. S. Nallusamy,
Department of ACEE,
Jadavpur University,
Kolkata, India.

Prof. Dr. Yusri bin Yusof,
Department of Mechanical and Manufacturing Engineering,
Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia.

Prof. Zhuang, Jun,
University at Buffalo,
The state University of New York,
Buffalo, United States.

Prof. Dr. Mohd Shukry Abdul Majid,
Department of Mechanical Engineering,
University Malaysia Perlis,
Malaysia.

Prof. Dr. Gautam Majumdar,
Department of Mechanical Engineering,
Jadavpur University,
Kolkata, India.

Dr. Hassan Al-Dabbas,
Department of Mechanical Engineering,
Philadelphia University,
Amman, Jordan.

Prof. Dr. T. Ramesh,
Department of Mechanical Engineering,
National Institute of Technology,
Trichy, India.

Dr. Dimitrios E. Mazarakos,
Department of Applied Mechanics,
University of Patras,
Greece.

Prof. Dr. Kaushikkumar Patel,
Department of Mechanical Engineering,
Institute of Technology, Nirma University,
India.

Prof. Wan, Qifeng,
Central South University of Forestry & Technology,
Changsha, China.

T. Sathish,
Department of Mechanical Engineering,
Saveetha School of Engineering,
Tamilnadu, India.

Dr. Rostami, Sajad,
Department of Mechanical Engineering,
Shahrekord University,
Shahr-e Kord, Iran.

Prof. Dr. Muhammad Hafidz Fazli Bin MD Fauadi,
Universiti Teknikal Malaysia Melaka, (UTeM),
Malaysia.

Prof. Dr. N. S. Mohan,
Department of Mechanical & Manufacturing Engineering,
Manipal Institute of Technology,
Manipal, India.

Dr. Chuka E. Chinwuko,
Department of Industrial Production Engineering,
Nnamdi Azikiwe University,
Nigeria.

Dr. Armin Rajabi,
Department of Mechanical Engineering,
National University of Malaysia,
Bangi, Malaysia.

Dr. V. Kavimani,
Department of Mechanical Engineering,
Karpagam Academy of Higher Education,
Coimbatore, India.

Dr. Mohd Shareduwan Mohd Kasihmuddin,
Department of Mechanical Engineering,
University Sains Malaysia,
Malaysia.

Dr. Partha Sarathi Chakraborty,
Department of ACEE,
Jadavpur University,
Kolkata, India.

Dr. Ilhan ASILTURK,
Department of Mechanical Engineering,
Selcuk University,
Konya, Turkey,
Dr. B. Venkateshwarlu,
School of Mechanical Engineering,
VIT University, Vellore Campus,
Tamilnadu, India.

Dr. Oyelaran Olatunde Ajani,
Department of Mechanical Engineering,
Federal University,
Nigeria.

Dr. C. G. Ramachandra,
Department of Mechanical Engineering,
School of Engineering, Presidency University,
Karnataka, India.

Prof. Dr. Sassykova, Larissa R.
Department of Mechanical Engineering,
Al Farabi Kazakh National University,
Almaty, Kazakhstan.

Abhinav Ravindra Giri,
Department of Mechanical Engineering,
Acropolis Institute of Technology & Research,
Madhya Pradesh, India.

Dr. Hussain, Fayaz,
NED University of Engineering & Technology,
Karachi, Pakistan.

Prof. Dr. Surya Narayan Padhi,
K L University,
Andhra Pradesh, India.

Dr. Surakasi Ravi Teja,
Department of Mechanical Engineering,
Lendi Institute of Engineering and Technology,
Andhra Pradesh, India.

Dr. Rika Ampuh Hadiguna,
Department of Industrial Engineering,
University of Andalas,
Indonesia.

Prof. Dr. Rajan . K,
Department of Mechanical Engineering,
Dr. M.G.R Educational and Research Institute,
Chennai, India.

Dr. Narayanan Jayanth,
Department of Mechanical Engineering,
National University of Singapore,
Singapore.

Dr. Ashok Kumar,
Department of Mechanical Engineering,
New Horizon College of Engineering,
Karnataka, India.

Prof. David, Jiri,
VSB-Technical University of Ostrava,
Ostrava, Czech Republic.

Dr. Basudeb Bhattacharyya,
Department of Aerospace Enegineering and
Applied Mechanics,
Indian Institute of Engineering Science and Technology,
India.

Dr. Amal Al Ghaferi,
Department of Mechanical Engineering,
Khalifa University,
Abu Dhabi, UAE.

Dr. M. K. Gupta,
Department of Mechanical Engineering,
Motilal Nehru National Institute of Technology,
Allahabad, India.

Dr. Satya Narain,
Department of Hydraulic & Water Resources Engineering,
Dilla University,
Dilla, Ethiopia.

Dr. Adekunle Adefemi Adeyemi,
Department of Mechatronics,
Federal University, Oye Ekiti,
Nigeria.

Dr. R. Senthil,
Department of Mechanical Engineering,
SRM Institute of Science and Technology,
Chennai, India.

Dr. Tan Chan Sin,
Department of Industrial Engineering,
School of Manufacturing Engineering,
Universiti Malaysia Perlis,
Malaysia.

Prof. Dr. M. OmKumar,
Department of Manufacturing Engineering,
Anna University,
Chennai, India.

Dr. Balla Srinivasa Prasad,
Department of Mechanical Engineering,
GITAM Deemed to be University,
Visakhapatnam, India.

Dr. Sachin Ganpatrao Ghalme,
Department of Mechanical Engineering,
Sandip Institute of Technology and Research Centre,
Nashik, Maharashtra.

Dr. TTM. Kannan,
Department of Mechanical Engineering,
M.A.M. School of Engineering,
Trichy, India.

Dr. Narendrakumar A. Patel,
Design Engineer in L & T Limited,
Hazira works,
Surat, Gujarat.

Dr. Anilkumar Shirahatti,
Department of Mechanical Engineering,
Maratha Mandal Engineering College,
India.

Dr. CH V K N S N Moorthy,
Department of Mechanical Engineering,
Vasavi College of Engineering,
Hyderabad, India.

Dr. Mardanali Chand Shaikh,
Department of Mechanical Engineering,
Brahmdevdada Mane Institute of Technology,
Solapur, India.

Dr. Vivek Wasudeorao Khond,
Department of Mechanical Engineering,
G H Raisoni College of Engineering,
Maharashtra, India.

Dr. T. Subba Reddy,
Department of Mechanical Engineering,
Andhra Loyola Institute of Engineering and Technology,
Andhra Pradesh, India.

Dr. Arun.Y.Patil,
School of Mechanical Engineering,
KLE Technological University,
Karnataka, India.

Dr. Issac, Praveen Kumar,
Department of Mechanical Engineering,
Saveetha School of Engineering,
Chennai, India.

Dr. Sendilvelan S,
Department of Mechanical Engineering,
Dr. M.G.R Educational and Research Institute,
Chennai, India.

Prof. Raffaele Di Gregorio,
Department of Engineering,
University of Ferrara,
Ferrara, Italy.

Prof. Dr. Alvarez, Jose C.,
Peruvian University of Applied Sciences,
Peru.

Dr. Yusin Yusof,
Department of Mechanical Engineering,
University Tun Hussein Onn Malaysia,
Johor, Malaysia.

Dr. Juan Carlos Quiroz,
School of Industrial Engineering,
University of Lima,
Peru. 

Dr. Jayant Khurpade
Department Of Mechanical Engineering, Government Polytechnic Gondia, Gondia, India

Long Yu
College of Mechanical and Electrical Engineering, Central South University, Changsha, China

Samet Bicen
Faculty of Marine Engineering, Maritime, Istanbul Technical University, Istanbul, Turkey

Dan Liang
Faculty of Mechanical Engineering and Mechanics, Ningbo University, Ningbo, China

Dr. Ramon Miralbes
Professor, Department of Engineering and Manufacturing, University of Zaragoza, Zaragoza, Spain

Debanik Roy
Division of Remote Handling and Robotics, Bhabha Atomic Research Centre,, Mumbai, India

Edward Osakue
Department of Industrial Technology, Texas Southern University, Houston, United States

Dr. Vilas Kalamkar
Professor, Department of Mechanical Engineering, Visvesvaraya National Institute of Technology, Nagpur, India

Shadab Ahmad
Department of Design, Delhi Technological University, Delhi, India

Dr. Shengyong Zhang
Associate Professor, Department of Mechanical and Civil Engineering, Purdue University Northwest, Hammond, United States.