This study investigates the mechanical behavior of chemically treated jute/polymer composites, aiming to enhance their performance and suitability for various engineering applications. Jute fiber, a natural and renewable resource, is combined with polymer matrices to produce lightweight and eco-friendly composite materials. However, untreated jute fibers exhibit limitations in terms of adhesion and compatibility with polymer matrices, leading to suboptimal mechanical properties. Chemical treatments are employed to modify the surface characteristics of jute fibers, enhancing their interfacial adhesion with polymer matrices and improving composite performance. Through a series of experiments, including tensile testing, flexural testing, and impact testing, the mechanical properties of chemically treated jute/polymer composites are evaluated and compared with untreated counterparts. Preliminary findings suggest that chemical treatments result in significant improvements in tensile strength, flexural strength, and impact resistance of the composites. The enhanced mechanical behavior of chemically treated jute/polymer composites holds promise for a wide range of applications, including automotive components, construction materials, and consumer goods.

Mechanical behavior, Jute/polymer composites, Tensile strength

Blazewicz S, Chlopek J, Litak A, Wajler C, Staszkow E ( 1997), Experimental Study of Mechanical Properties of Composite Carbon Screws, Biomaterials, 18; 437-439.

Chandramohan D, Bharanichandar J (2013) Natural fiber reinforced polymer composites for automobile accessories,. Proc. A. J .Env. Sci., 9 : 494-504.

Clemons CM, Caulfield DF (1994). Natural fibers Sage. J. Rein. Plastics Comp., 1 (1): 1354-66.

Joseph K, Filho RDT, James B, Thomas S, de Carvalho LH (1999). A review on sisal fiber reinforced polymer. Composites Revista Brasileira de Engenharia Agrícolae Ambiental, 3: 367-379.

Khashaba UA, Seif MA, Elhamid MA (2006) „Drilling analysis of chopped composites‟ Elsevier - Composites: Part A 38 : 61–70.

Mohanty AK, Misra M, Hinrichsen G (2000) Biofibers, biodegradable polymers and biocomposites: An overview. Macromol Mater Eng, 276(277) : 1–24.

Paul W, Jan I, Ignaas V (2003) „Natural fibres: can they replace glass in fibre reinforced plastics?‟ Elsevier – Comp. Sci and Tech., 63 (3) : 1259–1264.

Shah AN, Lakkad SC (1981) Mechanical properties of jute reinforced plastics, Fibre Sci. and Tech., 15 : 41- 46.