Articles
| Open Access | DETERMINATION OF KINEMATIC PARAMETERS OF THE BISATELLITE POINT IN A BIPLANETARY MECHANISM
Shamanov G'ulom Zohidovich,Xaydarova Sharifa Kamilovna,Shokirov Asliddin Pazlitdin o’g’li,Jobborova Maftuna Akrom qizi,Radjabova Sunbula Rajabovna , Tashkent Institute of Chemical Technology,Republic of Uzbekistan, TashkentAbstract
This study investigates the kinematic parameters of the bisatellite point in a biplanetary mechanism used in periodic dough mixing machines. Using the motion inversion method, we derive equations for angular velocities, trajectory, speed, and acceleration of the bisatellite point. Computational analysis in MathCAD 15 evaluates the influence of carrier rotation speed on extreme kinematic values, providing insights for optimizing biplanetary drive performance.
Keywords
biplanetary mechanism, kinematic parameters, bisatellite, dough mixing machine, motion inversion, angular velocity, trajectory optimization
References
Annaev N. A. et al. Compacting solid waste from chemical industries //AIP Conference Proceedings. – AIP Publishing, 2022. – Т. 2432. – №. 1.
Sharipov K. et al. Analysis of the effectiveness of hydrocarbon vapor condensation //International Journal of Artificial Intelligence. – 2025. – Т. 1. – №. 2. – С. 1287-1291.
Erkinov A., Xadjibayev A. USE OF ROTOR CLASSIFIERS IN THE POWDER SEPARATION PROCESS IN THE FOOD INDUSTRY //International Journal of Artificial Intelligence. – 2025. – Т. 1. – №. 2. – С. 458-460.
Khadjibaev A., Erkinov A., Shokirov A. INVESTIGATION OF THE PROCESS OF GRINDING OF SOLID OIL REFINERY WASTE IN THE IMPACT CENTRIFUGAL MILL //International Journal of Artificial Intelligence. – 2025. – Т. 1. – №. 2. – С. 478-482.
Lyamin A., Xadjibayev A., Erkinov A. STUDYING THE THERMAL CONDUCTIVITY OF MATERIALS //International Journal of Artificial Intelligence. – 2025. – Т. 1. – №. 3. – С. 328-336.
Абдуллаева С. Ш., Нурмухамедов Х. С., Абдуллаев А. Ш. Очистка корнеплодов методом мгновенного сброса давления //Химическая технология. Контроль и управление. – 2008. – №. 4. – С. 28-30.
Салимов З. С. и др. Эффективное использование углеводородных паров в первичной перегонке нефтегазоконденсатного сырья //Узбекский журнал нефти и газа. – 2011. – №. 2. – С. 34.
Shonazarovna A. S. et al. DEVELOPMENT AND OPTIMIZATION OF EFFICIENT TECHNOLOGICAL PROCESSES FOR THE REGENERATION OF TRANSFORMER OIL //AMERICAN JOURNAL OF EDUCATION AND LEARNING. – 2025. – Т. 3. – №. 3. – С. 1104-1107.
Tokhtasheva M., Erkinov A. THE STRUCTURE, STRUCTURE AND APPLICATION OF 3D PRINTER FILAMENTS: ANALYSIS AND PROSPECTS //Journal of Applied Science and Social Science. – 2025. – Т. 1. – №. 2. – С. 796-799.
Erkinov A. K., Xadjibayev A. S., Shokirov A. P. Rotor klassifikatorining ajratish zonasida havo oqimining gidrodinamikasini kompyuterda modellashtirish //Строительство и образование. – 2025. – Т. 4. – №. 2. – С. 295-299.
Article Statistics
Downloads
Copyright License
This work is licensed under a Creative Commons Attribution 4.0 International License.