This article examines the environmental challenges of ensuring the safe storage, transportation, and disposal of radioactive waste today. The problem of nuclear waste disposal and reforming comprehensive radioactive waste disposal measures is one of the most dangerous in the modern world. The disposal and disposal of radioactive waste from nuclear power plants is becoming particularly pressing today, requiring the selection of optimal disposal sites and methods. Methods for the disposal of low-, intermediate-, and high-level waste accumulated at nuclear power plants are also discussed.

Environmental disaster, radioactive waste, principles of dissolution and concentration, London Convention, spent nuclear fuel, waste packaging, concrete bunkers, buffer zones, disposal methods, vitrification procedure.

​​Reprocessing and Disposal of Spent Fuel from Nuclear Power Plants. [Electronic resource]. Access mode: http://otherreferats.aUbest.ru/physics/00187159_0.html (accessed: 18.04.2018);

Nuclear Power Plants – Spent Fuel Reuse and Disposal. [Electronic resource]. Access mode: http://www.evangelie.ru/forum/t88652.html (accessed: 20.04.2018);

L.I. Markitanova Problems of Radioactive Waste Neutralization https://openbooks.itmo.ru/ru/journal/548/nauchnyy_zhurnal_niu_itmo_seriya_ekonomika_i_ekologicheskiy_menedzhment.htm

Source: Fukushima-news.ru

Radioactive Waste Disposal: Global Experience and Challenges IAEA BULLETIN, January 39, 1997

NP-055-14 Radioactive Waste Disposal. Principles, Criteria, and Basic Safety Requirements. Rostekhnadzor Order No. 582 of November 22, 2018.

Toshov J., Baratov B., Sherov K., Mussayev M., Baymirzaev B., Esirkepov A., Ismailov G., Abdugaliyeva G., Burieva J. Ways to optimize the kinetic parameters of tricone drill bits // Material and Mechanical Engineering Technology, Kazakhstan, 2024, No. 1, pp. 35-45.

Toshov, Javokhir & Toshov, B.R. & Baratov, Bakhtiyor & Haqberdiyev, A.L.. (2022). Designing new generation drill bits with optimal axial eccentricity. Mining informational and analytical bulletin. 133-142. 10.25018/0236_1493_2022_9_0_133.

Baratov B. N., Umarov F. Ya., Toshov Zh. B. Assessment of the performance of tricone drill bits / Mining Journal - Moscow, 2021. - No. 12. – P.60-63.

O.V. Tuyboyov, N.F. Raxmanova, B.N.Baratov. Investigation into sustainable innovations in mining engineering for resource optimization and environmental efficiency// “Kon mashinalari va tekhologilar” Ilmiy-technik magazine, Toshkent, 2024, No. 1(7), pp.51-58.

Toshov, Z.B., Rahutin, M.G., Toshov, B.R., Baratov B.N. Tracking prevention in roller cone bit drilling // Eurasian Mining, 2024, 41(1), pages 62–66. DOI:10.17580/em.2024.01.15

Toshov, Javokhir & Baratov, Bakhtiyor & Baynazov, Umid. (2020). Method of calculating the gear ratios of the cones of tricone drill bits. E3S Web of Conferences. 201.01012.10.1051/e3sconf/202020101012.

Toshov, B. & Toshov, Javokhir & Akhmedova, L. & Baratov, Bakhtiyor. (2023). The new design scheme of drilling rock cutting tools, working in rotation mode pairs. E3S Web of Conferences. 383. 1-6. 10.1051/e3sconf/202338304069.